Unieke brandnorm CS3D0 8 mm polycarbonaat massief!

maandag 04/05/2015
Unieke brandnorm CS3D0 8 mm polycarbonaat massief!

CS3D0 / EN13501 (eq. M2 NF.P92-501 & NF.P92-505) SRT Plastics massieve polycarbonaat plaat 8 mm IR Absorberend UVP

Voor een groot bouwproject in Frankrijk kreeg SRT Plastics de vraag om een M2 certificaat of equivalent te behalen op massieve infrarood absorberende polycarbonaat plaat van 8 mm dikte. Door aanscherping van regels rond de toepassing en uitvoering van testen is dit vandaag de dag niet meer zo eenvoudig als vroeger. M2 is een verouderde classificatie die refereert aan de oude franse standaards NF.P92-501 en NF.P92-505. Europa werkt nu met de EN 13501-1, waarin CS3D0 equivalent is aan deze M2, maar dan volgens de nieuwe standaard. De bouwheer had een dwingende eis neergelegd voor het te behalen brandcertificaat. SRT Plastics, samenwerkend met Digiplastics, kreeg de uitdaging om een oplossing te vinden, en realiseerden die ook door nauw samen te werken met de meest geavanceerde producenten van grondstoffen en additieven. De meesten van hen waren zeer sceptisch over het bethalen van een brandcertificaat op 8 mm massieve polycarbonaat plaat. In werkelijkheid was het zeer moeilijk, maar niet onmogelijk. We hebben veel tijd en energie gespendeerd in testen en proefproducties, maar door volharding en continue leren van resultaten uit het verleden waren we in staat om te voldoen aan de gestelde eis voor brandwerendheid. Voor zover onze informatie reikt zijn wij de eersten en enigen die dit certificaat kunnen leveren. Dit unieke certificaat moet nieuwe mogelijkheden voor u en ons openen in de bouwwereld.

English

Meeting the requirement for fire resistancy was a ‘difficult story’. For the old glazing a certificate was available, because at that time it was still possible to obtain a certificate M2 in 8mm for polycarbonate solid sheet.  Today, by tightening the rules around applications of requirements and tests, this is not so easy. Now no supplier could to be found anymore that could provide an M2 or equivalent on 8mm solid polycarbonate sheet. M2 is an outdated classification that refers to the old French standards NF.P92-501 and NF.P92-505. Europe is now working with EN 13501-1, whose C S3 D0 equivalent to M2, but according to the new standard. However, the principal put a mandatory requirement on the table for fire resistance.  The combination SRT Plastics - Digiplastics was challenged to find the solution for the fire resistancy requirement and succeeded, amongst others, by working closely with the most advanced suppliers of raw materials and additives.  Most of them were very sceptical about achieving a fire certificate for 8mm polycarbonate solid sheet.  In reality it was very difficult but not impossible.  We spent a lot of time and energy in testing and trial productions but through perseverance and continuous learning from the past results, we were able to meet the required demand for fire resistance”. As far as our information reaches is the combination SRT Plastics - Digiplastics the only supplier of polycarbonate sheet that is able to provide this fire certificate on solid polycarbonate sheet 8 mm. This unique certificate should open up new possibilities for us all in the building & construction world.